Designed for hazardous industrial areas containing explosive gas and dust atmospheres, these IECEx and ATEX-certified Explosion-Proof LED Flood Light fixtures combine high safety, durability, and energy efficiency with power options of 20W, 30W, and 40W. Fully compliant with Zone 1, 2 (Gas) and Zone 21, 22 (Dust) environmental requirements, these floodlights provide uninterrupted and safe lighting performance even under harsh operating conditions.
- Power:20W/30W/40W
- Input voltage: AC100-240/277V, 50/60Hz
- Power factor: 0.97
- Lumen flux: 2400lm / 3600lm / 4800lm
- CCT: 2700K – 6500K (Optional)
- LEDs: 3030
- LED Driver: Meanwell HLG series
- Dimension: 200mm x 200mm x 147mm
- Weight: 4KG
- Industry-leading efficacy: up to 130lm/W±5
- -20°C to +40°C Ambient operating temperature
- Amounting: U-bracket
- Wide optics for uniform illumination
- 5 years warranty
- Entry Size: M25Χ1.5 or NPT 3/4”-14
- Housing –Aluminum alloy (ADC12 )
- Lens – tempered glass
- Beam angle: 90°, 108°
Have certified CES-J fixtures with the IECEX and ATEX standards for hazardous location and environments.
ATEX:
- EX II 2G Ex eb mb op is IIC T4 Gb
- EX II 2D Ex op is tb IIIC T(95°C) Db
- IP66
- Certify No.：IEP 19ATEX 0714
IECEx:
- Ex ec IIC T4 Gc
- IP66
- Certify No：IECEx UL 18.0046
- EN 60079-0: 2013
- EN 60079-7: 2015
- EN 60079-18: 2015
- EN 60079-28: 2015
- EN 60079-31：2014
Fix 2 M10 screws on the wall according to the distance between the holes of the bracket. Install the bracket on the screws and then fasten it with the nut. Fix the position of the lamp Place the lamp cord into the pole; connect the wire to local power supply (AC100-277V).
Warning：
- “WARNING – DO NOT OPEN WHEN ENERGIZED”
- “WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE IS PRESENT”
- “WARNING – ONLY USE CABLES SUITABLE FOR 85°C”
- End user shall use certified cable gland or conduit with suitable type of protection for final installation purpose.
- External earthing wire shall be connected when used and the cross-sectional areashall be more than 4mm2 or 10AWG.
- Under rating condition, maximum temperature on the luminaire’s shell shall not be higher than 95℃ for T4.Temperature at cable inlet shall not be higher than allowable limit of the cable applied, to ensure the cable operation normally.
